DUAL MOTOR DRIVER (ELECTRONIC 5 AMP)
  • Free Delivery
    From $50
  • 99% Customers
    Feedbacks
  • 365 Days
    For Free Return
  • Payment
    Secure System
  • Only Best
    Brands
DUAL MOTOR DRIVER (ELECTRONIC 5 AMP)
DUAL MOTOR DRIVER (ELECTRONIC 5 AMP)

DUAL MOTOR DRIVER (ELECTRONIC 5 AMP)

3 Reviews
| Ask a question
Available: In Stock
Rs. 560.00 Rs. 680.00

Check COD Availability

Product Features

  • 5 Amp. per motor capacity
  • Works with any circuit that gives 3 to 5 v high output
  • Soft Start and Stop provides long life to gearboxes.

Usage

  • Connect the 6 wires to circuits and 4 wires to Motors.
  • Upon giving the battery/power supply to circuit it will drive the motors as per the input from RC circuit / Microcontroller / PC output or any other circuit that gives 3-5 V output.
  • Pinouts:
    • Output section (Screwed connector)
      • Pin 1 : Motor 1 a
      • Pin 2 : Motor 1 b
      • Pin 3 : Motor 2 a
      • Pin 4 : Motor 2 b
    • Input Section (6 Pin male Header)
      • Pin 1 : Motor 1 + forward
      • Pin 2 : Motor 1 - reverse
      • Pin 3 : Motor 2 + forward
      • Pin 4 : Motor 2 + reverse
      • Pin 5 : +5 V output (For external circuits like MCU Board)
      • Pin 6 : GND
  • Power Connector
    • Power Supply +
    • Power Supply -

Product Features

  • 5 Amp. per motor capacity
  • Works with any circuit that gives 3 to 5 v high output
  • Soft Start and Stop provides long life to gearboxes.

Usage

  • Connect the 6 wires to circuits and 4 wires to Motors.
  • Upon giving the battery/power supply to circuit it will drive the motors as per the input from RC circuit / Microcontroller / PC output or any other circuit that gives 3-5 V output.
  • Pinouts:
    • Output section (Screwed connector)
      • Pin 1 : Motor 1 a
      • Pin 2 : Motor 1 b
      • Pin 3 : Motor 2 a
      • Pin 4 : Motor 2 b
    • Input Section (6 Pin male Header)
      • Pin 1 : Motor 1 + forward
      • Pin 2 : Motor 1 - reverse
      • Pin 3 : Motor 2 + forward
      • Pin 4 : Motor 2 + reverse
      • Pin 5 : +5 V output (For external circuits like MCU Board)
      • Pin 6 : GND
  • Power Connector
    • Power Supply +
    • Power Supply -

  • This is a ready to use dual H bridge module for controlling 2 DC motors with 5 Amp capacity each or a Stepper motor at max. 5 amp/phase. These motor drivers can be used to control any small to big motors. High speed PWM is also supported. It can be directly connected to 4 microcontroller pins to control 2 DC motor or a Stepper motor in Bipolar mode.
  • 5 Amp. per motor capacity
  • Works with any circuit that gives 3 to 5 v high output
  • Soft Start and Stop provides long life to gearboxes.

Usage

  • Connect the 6 wires to circuits and 4 wires to Motors.
  • Upon giving the battery/power supply to circuit it will drive the motors as per the input from RC circuit / Microcontroller / PC output or any other circuit that gives 3-5 V output.
  • Pinouts:
    • Output section (Screwed connector)
      • Pin 1 : Motor 1 a
      • Pin 2 : Motor 1 b
      • Pin 3 : Motor 2 a
      • Pin 4 : Motor 2 b
    • Input Section (6 Pin male Header)
      • Pin 1 : Motor 1 + forward
      • Pin 2 : Motor 1 - reverse
      • Pin 3 : Motor 2 + forward
      • Pin 4 : Motor 2 + reverse
      • Pin 5 : +5 V output (For external circuits like MCU Board)
      • Pin 6 : GND
  • Power Connector
    • Power Supply +
    • Power Supply -
  • DUAL MOTOR DRIVER (ELECTRONIC 5 AMP)
  • As Per Manufacturer