BRUSHLESS DC MOTOR DRIVER 250W WITH SENSOR FEEDBACK
  • Free Delivery
    From $50
  • 99% Customers
    Feedbacks
  • 365 Days
    For Free Return
  • Payment
    Secure System
  • Only Best
    Brands
BRUSHLESS DC MOTOR DRIVER 250W WITH SENSOR FEEDBACK
BRUSHLESS DC MOTOR DRIVER 250W WITH SENSOR FEEDBACK

BRUSHLESS DC MOTOR DRIVER 250W WITH SENSOR FEEDBACK

3 Reviews
| Ask a question
Available: In Stock
Rs. 3,250.00 Rs. 3,900.00

Check COD Availability

Product Features

  • Input Supply Voltage: 15 to 48V
  • Rated current : 5A
  • Peak Current: 20A
  • Smooth and quiet operation at all speeds and extremely low motor heating
  • Fully configurable position and velocity loop
  • Delivers up to 5A of continuous current
  • 2.5V, 3.3V and 5V compatible BRAKE, DIRECTION and ENABLE inputs with 2-wire opto-isolated interface
  • Short-circuit protection for the motor outputs, over-voltage and under-voltage   protection
  • LED indication for power and error states
  • Ambient Temperature : 0-70°C

Product Features

  • Input Supply Voltage: 15 to 48V
  • Rated current : 5A
  • Peak Current: 20A
  • Smooth and quiet operation at all speeds and extremely low motor heating
  • Fully configurable position and velocity loop
  • Delivers up to 5A of continuous current
  • 2.5V, 3.3V and 5V compatible BRAKE, DIRECTION and ENABLE inputs with 2-wire opto-isolated interface
  • Short-circuit protection for the motor outputs, over-voltage and under-voltage   protection
  • LED indication for power and error states
  • Ambient Temperature : 0-70°C
  • RMCS-3001 is Rhino Motion Controls introductory Brushless low voltage (15–48 V) DC drive designed for smooth and quiet operation without compromising on torque and control at higher speeds. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection and will survive accidental motor disconnects while powered-up.
  • The ENABLE, BRAKE and DIRECTION inputs are optically isolated. These inputs work with 2.5V to 5V logic drive signals. Motor will run on application of +ve input supply to ENABLE pins. To facilitate the direction change of Motor shaft, dedicated DIR pin is given. After applying the +ve input supply to DIR pin, power reset is required. BRAKE feature provided for braking the motor rotation.

    Driver Technical Specifications

    Specification

    Min

    Max

    Units

    Comments

    Supply Voltage

    15

    48

    Volts DC

    Between +Ve and GND

    Phase Current

    0.5

    5

    Amps

    As demanded by load

    Auto Current Reduction

    50%

    70%

    Motor stand-still for more than 10ms

    Power Dissipation

    0

    15

    Watts

    Short-Circuit Current

    3

    5

    Amps

    In case of motor terminal short

    DIR Voltage

    2.5

    5

    Volts DC

    Ambient Temp.

    0

    70

    Celsius

    Humidity

    0

    95%

    Non condensing


    Driver Mechanical Specifications

    Specification

    Details

    Dimensions (L * W * H)

    100mm * 75mm *25mm

    Weight

    155gms

    Heat Sink

    Anodized Aluminum 3mm thickness

    Mounting Screw Holes

    3.6mm minimum diameter


    Hall Effect Sensor Terminal

    Terminal No.

    Terminal Name

    Wire Colour

    Description

    Terminal 1

    Shield

    -

    Shield Cable

    Terminal 2

    HU

    Yellow

    Hall U

    Terminal 3

    HV

    Green

    Hall V

    Terminal 4

    HW

    Blue

    Hall W

    Terminal 5

    +5V

    -

    Power +Ve(+5V Output)

    Terminal 6

    GND

    -

    GND

     

    Control Input Assignments

    Terminal No.

    Terminal Name

    Description

    Terminal 1

    GND

    COM

    Terminal 2

    ENA

    Enable (Motor Free) +Ve input

    Terminal 3

    BRK

    Brake(Motor Lock) +Ve input

    Terminal 4

    DIR

    Direction (Motor Change Directions) +Ve input

     

    Indication and Control

    Resolution

    Description

    Pot-1

    Potentiometer for speed  control

    Pot-2

    Current Setting

    • BRUSHLESS DC MOTOR DRIVER 250W WITH SENSOR FEEDBACK
    • As Per Manufacturer