17DOF HUMANOID ROBOT DIY KIT WITH 18 SERVO CONTROLLER
  • Free Delivery
    From $50
  • 99% Customers
    Feedbacks
  • 365 Days
    For Free Return
  • Payment
    Secure System
  • Only Best
    Brands
17DOF HUMANOID ROBOT DIY KIT WITH 18 SERVO CONTROLLER
17DOF HUMANOID ROBOT DIY KIT WITH 18 SERVO CONTROLLER

17DOF HUMANOID ROBOT DIY KIT WITH 18 SERVO CONTROLLER

Write a review
| Ask a question
Available: In Stock
Rs. 26,600.00 Rs. 31,600.00

Check COD Availability

Product Features

  • Arches punching, corner cutting
  • Cost-effective and easy-to-use
  • For hobbyists, robot competition, kids
  • Humanoid robot
  • Colour: Black
  • Size:40cm(H)*23cm(W)

    Product Features

    • Arches punching, corner cutting
    • Cost-effective and easy-to-use
    • For hobbyists, robot competition, kids
    • Humanoid robot
    • Colour: Black
    • Size:40cm(H)*23cm(W)
      • This robot is a professional small humanoid robot consist of full aluminum parts, smooth surface with smooth edges not hurting hands, the metal is unbleached, beautiful and durable.
      • The High Torque Standard Servo Motor with Dual Ball Bearing and Metal Gears. Provides 14kg/cm at 4.8V and 16kg/cm at 6V. Replacement for HS-645MG.
      • Arduino Uno R3 based USB 18 Servo Controller is ideal for making Autonomous and PC based systems which run over Hobby Servo motors.
      • The software helps to develop the complex sequences in real time on the hardware like robotic arms, walkers, bipeds and any other servo controlled system.
      • It also generates Arduino based code for the developed sequence which can be deployed on the controller on board thereby making the robot autonomous.
      • Required Pulse: 3-5 Volt Peak to Peak Square Wave
      • Operating Voltage: 4.8-6.0 Volts
      • Operating Temperature Range: -10 to +60 Degree C
      • Operating Speed (4.8V): 0.18sec/60 degrees at no load
      • Operating Speed (6.0V): 0.14sec/60 degrees at no load
      • Stall Torque (4.8V): 14kg/cm
      • Stall Torque (6.0V): 16kg/cm
      • 360 Modifiable: Yes
      • Potentiometer Drive: Indirect Drive
      • Bearing Type: Double Ball Bearing
      • Gear Type: All Metal Gears
      • Connector Wire Length: 12"
      • Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
      • Weight: 48gm

        • As per manufacturer